MCQs

Explanation
As temperature increases , the heat energy of a substance also increases. This is because temperature is a measure of the average kinetic energy of the particles in a substance , and as temperature increases, the particles gain kinetic energy and therefore heat energy.

Explanation
James Prescott Joule established that the various forms of energy, mechanical, electrical and heat, are basically the same and can be changed from one form into another. He demonstrated that different forms of energy are interchangeable in his most famous experiment, published in 1845, using a paddle wheel to show that mechanical energy could be changed into thermal energy.

Explanation
Solids like sawdust float on water because they are less dense than water. When sawdust is added to water, it forms a heterogeneous mixture. Where the sawdust particles remain separate from the water and float on the surface.

Explanation
Solids like salt (sodium chloride) dissolve in water to form a saltwater mixture or solution . When salt is added to water, the salt particles break apart and distribute evenly throughout the water, creating a homogeneous mixture.

Explanation
Solids like sand remain suspended in water because they are denser than water. But not dense enough to sink to the bottom immediately. This creates a heterogeneous mixture, where the sand particles remain suspended in the water.

Explanation
Heat is a form of energy that is transferred from one body to another due to a temperature difference. It is a type of kinetic energy that is transferred through the motion of particles.

Explanation
Temperature is the measurement of the hotness or coldness of an object or substance. It is a physical property that is usually measured in units of Celsius (°C), Fahrenheit (°F), or Kelvin (K).

Explanation
When you put sand, salt, and sawdust in a glass of water, the following things happen: Salt dissolves in water, meaning it breaks down into individual particles that are distributed evenly throughout the water. Sand sinks to the bottom of the glass, because it is denser than water and cannot float or dissolve in it. Sawdust floats on top of the water, because it is less dense than water and is able to remain suspended on the surface.

Explanation
The process of separating solute and solvent from a mixture is generally referred to as Filtration . Filtration is used to separate an insoluble solid (solute) from a liquid (solvent) by passing the mixture through a filter.

Explanation
Filtration is the process of separating an insoluble solid from a liquid by passing the mixture through a filter paper or a porous material. The solid particles are retained by the filter. While the liquid passes through, resulting in a clear separation of the two.

Explanation
Decantation is the process of carefully pouring a liquid from one container to another, leaving the solid particles that have settled at the bottom of the original container behind. This process is used to separate a liquid from a solid, without disturbing the solid.

Explanation
Water (H2O) is a compound made up of two hydrogen atoms and one oxygen atom. It is a chemical combination of two different elements, which is the definition of a compound.

Explanation
Solids like sand remain suspended in water because they are denser than water. But not dense enough to sink to the bottom immediately. This creates a heterogeneous mixture, where the sand particles remain suspended in the water.

Explanation
Solids like sawdust float on water because they are less dense than water. When sawdust is added to water, it forms a heterogeneous mixture. Where the sawdust particles remain separate from the water and float on the surface.

Explanation
Solids like salt (sodium chloride) dissolve in water to form a saltwater mixture or solution . When salt is added to water, the salt particles break apart and distribute evenly throughout the water, creating a homogeneous mixture.

Explanation
Heat is a form of energy that is transferred from one body to another due to a temperature difference. It is a type of kinetic energy that is transferred through the motion of particles.

Explanation
Temperature is the measurement of the hotness or coldness of an object or substance. It is a physical property that is usually measured in units of Celsius (°C), Fahrenheit (°F), or Kelvin (K).

Explanation
When you put sand, salt, and sawdust in a glass of water, the following things happen: Salt dissolves in water, meaning it breaks down into individual particles that are distributed evenly throughout the water. Sand sinks to the bottom of the glass, because it is denser than water and cannot float or dissolve in it. Sawdust floats on top of the water, because it is less dense than water and is able to remain suspended on the surface.

Explanation
The process of separating solute and solvent from a mixture is generally referred to as Filtration . Filtration is used to separate an insoluble solid (solute) from a liquid (solvent) by passing the mixture through a filter.

Explanation
Filtration is the process of separating an insoluble solid from a liquid by passing the mixture through a filter paper or a porous material. The solid particles are retained by the filter. While the liquid passes through, resulting in a clear separation of the two.

Explanation
Decantation is the process of carefully pouring a liquid from one container to another, leaving the solid particles that have settled at the bottom of the original container behind. This process is used to separate a liquid from a solid, without disturbing the solid.

Explanation
Water (H2O) is a compound made up of two hydrogen atoms and one oxygen atom. It is a chemical combination of two different elements, which is the definition of a compound.

Explanation
Solids like sand remain suspended in water because they are denser than water. But not dense enough to sink to the bottom immediately. This creates a heterogeneous mixture, where the sand particles remain suspended in the water.

Explanation
Solids like sawdust float on water because they are less dense than water. When sawdust is added to water, it forms a heterogeneous mixture. Where the sawdust particles remain separate from the water and float on the surface.

Explanation
Solids like salt (sodium chloride) dissolve in water to form a saltwater mixture or solution . When salt is added to water, the salt particles break apart and distribute evenly throughout the water, creating a homogeneous mixture.

Explanation
Heat is a form of energy that is transferred from one body to another due to a temperature difference. It is a type of kinetic energy that is transferred through the motion of particles.

Explanation
Temperature is the measurement of the hotness or coldness of an object or substance. It is a physical property that is usually measured in units of Celsius (°C), Fahrenheit (°F), or Kelvin (K).

Explanation
When you put sand, salt, and sawdust in a glass of water, the following things happen: Salt dissolves in water, meaning it breaks down into individual particles that are distributed evenly throughout the water. Sand sinks to the bottom of the glass, because it is denser than water and cannot float or dissolve in it. Sawdust floats on top of the water, because it is less dense than water and is able to remain suspended on the surface.

Explanation
The process of separating solute and solvent from a mixture is generally referred to as Filtration . Filtration is used to separate an insoluble solid (solute) from a liquid (solvent) by passing the mixture through a filter.

Explanation
Filtration is the process of separating an insoluble solid from a liquid by passing the mixture through a filter paper or a porous material. The solid particles are retained by the filter. While the liquid passes through, resulting in a clear separation of the two.

Explanation
Decantation is the process of carefully pouring a liquid from one container to another, leaving the solid particles that have settled at the bottom of the original container behind. This process is used to separate a liquid from a solid, without disturbing the solid.

Explanation
Water (H2O) is a compound made up of two hydrogen atoms and one oxygen atom. It is a chemical combination of two different elements, which is the definition of a compound.

Explanation
Solids like sand remain suspended in water because they are denser than water. But not dense enough to sink to the bottom immediately. This creates a heterogeneous mixture, where the sand particles remain suspended in the water.

Explanation
Solids like sawdust float on water because they are less dense than water. When sawdust is added to water, it forms a heterogeneous mixture. Where the sawdust particles remain separate from the water and float on the surface.

Explanation
Solids like salt (sodium chloride) dissolve in water to form a saltwater mixture or solution . When salt is added to water, the salt particles break apart and distribute evenly throughout the water, creating a homogeneous mixture.

Explanation
Heat is a form of energy that is transferred from one body to another due to a temperature difference. It is a type of kinetic energy that is transferred through the motion of particles.

Explanation
Temperature is the measurement of the hotness or coldness of an object or substance. It is a physical property that is usually measured in units of Celsius (°C), Fahrenheit (°F), or Kelvin (K).

Explanation
When you put sand, salt, and sawdust in a glass of water, the following things happen: Salt dissolves in water, meaning it breaks down into individual particles that are distributed evenly throughout the water. Sand sinks to the bottom of the glass, because it is denser than water and cannot float or dissolve in it. Sawdust floats on top of the water, because it is less dense than water and is able to remain suspended on the surface.

Explanation
The process of separating solute and solvent from a mixture is generally referred to as Filtration . Filtration is used to separate an insoluble solid (solute) from a liquid (solvent) by passing the mixture through a filter.

Explanation
Filtration is the process of separating an insoluble solid from a liquid by passing the mixture through a filter paper or a porous material. The solid particles are retained by the filter. While the liquid passes through, resulting in a clear separation of the two.

Explanation
Decantation is the process of carefully pouring a liquid from one container to another, leaving the solid particles that have settled at the bottom of the original container behind. This process is used to separate a liquid from a solid, without disturbing the solid.

Explanation
Water (H2O) is a compound made up of two hydrogen atoms and one oxygen atom. It is a chemical combination of two different elements, which is the definition of a compound.

Explanation
Solids like sand remain suspended in water because they are denser than water. But not dense enough to sink to the bottom immediately. This creates a heterogeneous mixture, where the sand particles remain suspended in the water.

Explanation
Solids like sawdust float on water because they are less dense than water. When sawdust is added to water, it forms a heterogeneous mixture. Where the sawdust particles remain separate from the water and float on the surface.

Explanation
Solids like salt (sodium chloride) dissolve in water to form a saltwater mixture or solution . When salt is added to water, the salt particles break apart and distribute evenly throughout the water, creating a homogeneous mixture.

Explanation
Heat is a form of energy that is transferred from one body to another due to a temperature difference. It is a type of kinetic energy that is transferred through the motion of particles.