Skip to main content

Fuels And Combustion — Part 1 MCQs with Explanations

Practice high-yield Chemical Engineering MCQs on Fuels And Combustion — Part 1 with worked academic solutions for FPSC, PPSC, PAEC, OGDCL.

Questions
40
Difficulty Level
Exam-Level
Target Exams
FPSC, PPSC, PAEC...
Estimated Time
48 mins
Exam-Level FPSC PPSC PAEC OGDCL
Verified for Commission Syllabus • Oct 14, 2026
40

Verified Practice Questions

Interactive test mode with detailed academic worked solutions

Live Progress | 0/40 answered
✓ 0 correct ✗ 0 wrong 0% score
Question 1 of 40
★ FPSC ★ PPSC

Calorific value of dry wood may be around __________ Kcal/kg.

Question 2 of 40
★ FPSC ★ PPSC

Incomplete combustion of fuel in the furnace is judged by high __________ of the flue gases.

Question 3 of 40
★ FPSC ★ PPSC

High sulphur content in a fuel __________ of the flue gases.

Question 4 of 40
★ FPSC ★ PPSC

Fusion point of coal ash generally varies from 1000 to 1700°C. Ash having fusion point less than __________ °C is liable to form clinker.

Question 5 of 40
★ FPSC ★ PPSC

Coal tar fuel - 200 (CTF 200) is a mixture of

Question 6 of 40
★ FPSC ★ PPSC

Kopper-Totzek coal gasifier (installed in a coal based nitrogeneous fertiliser plant) employs a/an __________ bed gasifier.

Question 7 of 40
★ FPSC ★ PPSC

Which of the following combustibles is absent in blast furnace gas?

Question 8 of 40
★ FPSC ★ PPSC

Which of the following would require maximum amount of % excess air for complete combustion?

Question 9 of 40
★ FPSC ★ PPSC

A sample of natural gas containing 80% methane (CH 4 ) and rest nitrogen (N 2 ) is burnt with 20% excess air. With 80% of the combustibles producing CO 2 and the reminder going to CO, the Orsat analysis in volume percent is

Question 10 of 40
★ FPSC ★ PPSC

Calorific value of gobar gas (containing CH 4 = 60%, H 2 = 10%, CO 2 = 30%) may be about __________ Kcal/Nm 3 .

Question 11 of 40
★ FPSC ★ PPSC

Calorific value of coal middling generated in coal washeries during washing of coal may be around __________ Kcal/kg.

Question 12 of 40
★ FPSC ★ PPSC

Calorific value of bituminous coal may be around __________ Kcal/kg.

Question 13 of 40
★ FPSC ★ PPSC

Calorific value of a typical dry anthracite coal may be around __________ Kcal/kg.

Question 14 of 40
★ FPSC ★ PPSC

Ash content in the coke produced from a coking coal having 20% ash may be around __________ percent.

Question 15 of 40
★ FPSC ★ PPSC

Volatile matter content of metallurgical coke may be around __________ percent.

Question 16 of 40
★ FPSC ★ PPSC

Quantity of coke produced from metallurgical coal may be around __________ percent.

Question 17 of 40
★ FPSC ★ PPSC

Abrasion index of blast furnace coke should be around __________ percent.

Question 18 of 40
★ FPSC ★ PPSC

Which of the following is not a binder for coal briquetting?

Question 19 of 40
★ FPSC ★ PPSC

Natural draught produced by a chimney depends upon the

Question 20 of 40
★ FPSC ★ PPSC

In flue gas analysis by Orsat's apparatus, carbon dioxide is absorbed by

Question 21 of 40
★ FPSC ★ PPSC

For maximum discharge through a chimney, its height should be

Question 22 of 40
★ FPSC ★ PPSC

Fuel consumption in coke making can be reduced by

Question 23 of 40
★ FPSC ★ PPSC

Blast furnace gas compared to coke oven gas has

Question 24 of 40
★ FPSC ★ PPSC

Combustion of pulverised coal as compared to that of lump coal

Question 25 of 40
★ FPSC ★ PPSC

Mott and Wheeler test is conducted on coke to find its

Question 26 of 40
★ FPSC ★ PPSC

Main constituent of natural gas is

Question 27 of 40
★ FPSC ★ PPSC

Method of maintaining fires in furnace during standby periods without undue consumption of fuel is called

Question 28 of 40
★ FPSC ★ PPSC

Increase in ash content of blast furnace coke

Question 29 of 40
★ FPSC ★ PPSC

Rate of low temperature oxidation of coal due to bad storage conditions

Question 30 of 40
★ FPSC ★ PPSC

During combustion of a gaseous fuel, the presence of a non-luminous flame is an indication of the

Question 31 of 40
★ FPSC ★ PPSC

Which of the following is a primary fuel?

Question 32 of 40
★ FPSC ★ PPSC

Which of the following is not endothermic?

Question 33 of 40
★ FPSC ★ PPSC

Which of the following fuel gases will require maximum amount of air for combustion of 1 Nm 3 gas?

Question 34 of 40
★ FPSC ★ PPSC

During combustion of coal on grate, clinker formation is increased by the

Question 35 of 40
★ FPSC ★ PPSC

Coke oven gas is stripped of its H 2 S and mercaptans content by

Question 36 of 40
★ FPSC ★ PPSC

Which of the following has the highest flame speed?

Question 37 of 40
★ FPSC ★ PPSC

A good coking coal should have high __________ content.

Question 38 of 40
★ FPSC ★ PPSC

If oxygen content in the flue gas rises too high, fuel is being wasted by

Question 39 of 40
★ FPSC ★ PPSC

Coking time in beehive coke oven is about

Question 40 of 40
★ FPSC ★ PPSC

Too much of excess air in combustion results in high

✓ Link copied to clipboard
Continue Your Practice

Chemical Engineering Basics — Part 1

Master the next curriculum module with 40 exam-standard MCQs.

Next Practice Set →

💡 Examiner's Advisory for Chemical Engineering

In competitive commission exams (FPSC, PPSC, KPPSC, SPSC, CSS, PMS), questions are frequently phrased with distractor options designed to catch rote learners. Whenever you answer an MCQ, read the Detailed Academic Explanation and Conceptual Anchor to understand why the remaining options are incorrect.

More Modules in Chemical Engineering

View All →
📚

Study Guides

Topic summaries and syllabus breakdown

Explore Guides →
🎯

Complete Library

Search through 78,000+ verified MCQs

Browse Library →
📱

Mobile App

Offline mock tests and instant bookmarks

Get Mobile App →