Series Circuits MCQs with Explanations
Practice high-yield Electrical Engineering MCQs on Series Circuits with worked academic solutions for WAPDA, NTDC, IESCO, LESCO, PPSC, FPSC.
Questions
35
Difficulty Level
Exam-Level
Target Exams
WAPDA, NTDC, IESCO...
Estimated Time
42 mins
Exam-Level WAPDA NTDC IESCO LESCO PPSC FPSC
Verified for Commission Syllabus • Oct 14, 2026
35
Verified Practice Questions
Interactive test mode with detailed academic worked solutions
Live Progress | 0/35 answered
✓ 0 correct
✗ 0 wrong
0% score
🎉 Set complete! All 35 questions answered.
Question 1 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
Question 2 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
Four equal-value resistors are in series with a 12 V battery and 13.63 mA are measured. The value of each resistor is
Question 3 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
‘Series aiding’ is a term sometimes used to describe voltage sources of the same polarity in series.
Question 4 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
A series circuit consists of three resistors with values of 120 Ω, 270 Ω, and 330 Ω. The total resistance is
Question 5 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
A 12 V battery is connected across a series combination of 68 Ω, 47 Ω, 220 Ω, and 33 Ω. The amount of current is
Question 6 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
Two resistors are in series: a 5.6 kΩ resistor and a 4.7 kΩ resistor. The voltage drop across the 5.6 kΩ resistor is 10 V. The voltage across the 4.7 kΩ resistor is
Question 7 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
The total power in a certain circuit is 12 W. Each of the four equal-value series resistors making up the circuit dissipates
Question 8 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
Five resistors are connected in a series and there is a current of 3 A into the first resistor. The amount of current into the second resistor is
Question 9 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
The total resistance of a series circuit is equal to the difference between the largest and smallest value resistors.
Question 10 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
There are five resistors in a given series circuit and each resistor has 6 V dropped across it. The source voltage is
Question 11 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
A series circuit consists of three resistors. Two resistors are 1.2 kΩ each. The total resistance is 12 kΩ. The value of the third resistor is
Question 12 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
If you know the current anywhere in a series circuit, you know the current everywhere in a series circuit.
Question 13 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
A short in a series circuit prevents current.
Question 14 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
To measure the current out of the second resistor in a circuit consisting of four resistors, an ammeter can be placed
Question 15 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
A series circuit consists of a 4.7 kΩ, a 12 kΩ, and a 2.2 kΩ resistor. The resistor that has the most voltage drop is
Question 16 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
The sum of all the voltage drops around a single closed loop in a circuit is zero.
Question 17 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
When one of three series resistors is removed from a circuit and the circuit is reconnected, the current
Question 18 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
Three 680 Ω resistors are connected in series with a 470 V source. Current in the circuit is
Question 19 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
The term 'series opposing' means that sources are in series with opposite polarities.
Question 20 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
A certain series circuit consists of a $$\frac{1}{8}$$ W resistor, a $$\frac{1}{4}$$ W resistor and a $$\frac{1}{2}$$ W resistor. The total resistance is 1200 Ω. If each resistor is operating in the circuit at its maximum power dissipation, total current flow is
Question 21 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
Two 1.5 V cells are connected series opposing across two 100 Ω resistors in series. Total current flow is
Question 22 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
In a series circuit, the individual powers are additive.
Question 23 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
Which of the following series combinations dissipates the most power when connected across a 120 V source?
Question 24 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
A series circuit acts as a current divider.
Question 25 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
A series circuit acts as a voltage divider.
Question 26 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
The total resistance of a circuit is 680 Ω. The percentage of the total voltage appearing across a 47 Ω resistor that makes up part of the total series resistance is
Question 27 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
The total resistance of eight 5.6 kΩ resistors in series is
Question 28 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
When a fourth resistor is connected in series with three resistors, the total resistance
Question 29 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
If a 24 V and a 6 V battery are series opposing, the total voltage is
Question 30 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
If a 6 V and a 9 V source are connected series aiding, the total voltage is
Question 31 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
The following resistors (one each) are connected in a series circuit: 470 Ω, 680 Ω, 1 kΩ, and 1.2 kΩ. The voltage source is 20 V. Current through the 680 Ω resistor is approximately
Question 32 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
Two 6 V batteries are connected series aiding across two 1.2 kΩ resistors in series. Current through each resistor is
Question 33 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
A series circuit has a 24 V source and a total resistance of 120 Ω. The current through each resistor is
Question 34 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
The voltage at one point in a circuit is always measured relative to another point.
Question 35 of 35
★ WAPDA
★ NTDC
★ WAPDA
★ NTDC
A string of five series resistors is connected across a 6 V battery. Zero voltage is measured across all resistors except R3. The voltage across R3 is
✓ Link copied to clipboard
Continue Your Practice
Next Practice Set → A_C Fundamentals_ Circuits And Circuit Theory — Part 1
Master the next curriculum module with 40 exam-standard MCQs.
💡 Examiner's Advisory for Electrical Engineering
In competitive commission exams (FPSC, PPSC, KPPSC, SPSC, CSS, PMS), questions are frequently phrased with distractor options designed to catch rote learners. Whenever you answer an MCQ, read the Detailed Academic Explanation and Conceptual Anchor to understand why the remaining options are incorrect.
More Modules in Electrical Engineering
View All → A_C Fundamentals_ Circuits And Circuit Theory — Part 1
40 MCQs
Practice →
A_C Fundamentals_ Circuits And Circuit Theory — Part 2
40 MCQs
Practice →
Alternating Current And Voltage
37 MCQs
Practice →
Amplifiers With Negative Feedback
18 MCQs
Practice →
Branch_ Loop And Node Analyses
18 MCQs
Practice →
Capacitors
32 MCQs
Practice →