Engineering Drawing — Part 2 MCQs with Explanations

Perspective is the correct answer to “These types of projectors converge at a vanishing point:”. This question is standard in competitive examination syllabi for Engineering Drawing.

120° is the correct answer to “The edges of a cube in isometric projection make angles of this many degrees with each other:”. This question is standard in competitive examination syllabi for Engineering Drawing.

Detail is the correct answer to “In order to create an accurate assembly drawing the drafter should create the ________ drawings first.”. This question is standard in competitive examination syllabi for Engineering Drawing.

O Snaps is the correct answer to “Inserting blocks into a drawing file usually requires exacting placement. The drafter should insure that ________ is turned on.”. This question is standard in competitive examination syllabi for Engineering Drawing.

Block Definition Dialog is the correct answer to “When the drafter types the word BLOCK or selects the Make Block tool from the Draw tool bar the _________ will appear.”. This question is standard in competitive examination syllabi for Engineering Drawing.

Floor plan is the correct answer to “The architectural drafter usually begins a set of working drawings by creating the ________ plan first.”. This question is standard in competitive examination syllabi for Engineering Drawing.

Limits is the correct answer to “The maximum and minimum sizes of a feature are identified by a ________ tolerance.”. This question is standard in competitive examination syllabi for Engineering Drawing.

Publicly funded is the correct answer to “The architectural and construction industries use the United States National CAD standard (NCS) system on many ________ projects.”. This question is standard in competitive examination syllabi for Engineering Drawing.

Civil is the correct answer to “A drafter who develops technical drawings of a highway overpass would most likely be a ________ drafter.”. This question is standard in competitive examination syllabi for Engineering Drawing.

Linear and continuous is the correct answer to “When dimensioning architectural drawings architects will utilize both ________ and ________ options.”. This question is standard in competitive examination syllabi for Engineering Drawing.

Broken out is the correct answer to “When only a small section of an interior area needs to be revealed the drafter can use a ________ section.”. This question is standard in competitive examination syllabi for Engineering Drawing.

All of the above is the correct answer to “To avoid having to dimension to a hidden feature the drafter can utilize a ________ section.”. This question is standard in competitive examination syllabi for Engineering Drawing.

Modify is the correct answer to “The Free Orbit tool is found on the ________ toolbar.”. This question is standard in competitive examination syllabi for Engineering Drawing.

Ruled surface is the correct answer to “This type of surface may be a plane, a single curved surface, or a warped surface:”. This question is standard in competitive examination syllabi for Engineering Drawing.

See the entire bounding area to hatch is the correct answer to “When filling an area with a hatch pattern in Auto-CAD the drafter needs to be able to ________.”. This question is standard in competitive examination syllabi for Engineering Drawing.

Root is the correct answer to “This is the bottom surface joining the sides of two adjacent threads:”. This question is standard in competitive examination syllabi for Engineering Drawing.

Control the accuracy of the drawing is the correct answer to “Understanding the Cartesian coordinate system will help the beginning drafter __________.”. This question is standard in competitive examination syllabi for Engineering Drawing.

Quick Dimension is the correct answer to “The ________ tool on the Dimension tool bar will place several dimensions at one time by using a selection box placed over several part features.”. This question is standard in competitive examination syllabi for Engineering Drawing.

Structure location plans is the correct answer to “These maps are used to plan construction projects that locate construction features so they fit the topography of the area:”. This question is standard in competitive examination syllabi for Engineering Drawing.

U.S. customary units is the correct answer to “These units are based on inch-foot and yard measurements:”. This question is standard in competitive examination syllabi for Engineering Drawing.

All of the above is the correct answer to “The View toolbar will position the view of the 3-D solid toward the ________.”. This question is standard in competitive examination syllabi for Engineering Drawing.

Leader is the correct answer to “This is a thin solid line directing attention to a note or dimension and starting with an arrowhead or dot:”. This question is standard in competitive examination syllabi for Engineering Drawing.

The Finished plot is the correct answer to “The dimension text size is determined by what the architect deems necessary in _________.”. This question is standard in competitive examination syllabi for Engineering Drawing.

Quarter is the correct answer to “Architectural drawings used to construct a house are often plotted with a scale of $${\frac{1}{4}^{''}} = {1^{'}}{\text{ - }}{0^{''}}.$$ What scale is this”. This question is standard in competitive examination syllabi for Engineering Drawing.

Different line widths convey different information is the correct answer to “Traditional drafters need to be able to create several different line widths because ________.”. This question is standard in competitive examination syllabi for Engineering Drawing.

Round is the correct answer to “This is a rounded exterior blend between surfaces:”. This question is standard in competitive examination syllabi for Engineering Drawing.

Half section is the correct answer to “In this type of section, one quarter of the object is removed:”. This question is standard in competitive examination syllabi for Engineering Drawing.

Tolerance is the correct answer to “This is the total amount that the feature on the actual part is allowed to vary from what is specified by the dimension:”. This question is standard in competitive examination syllabi for Engineering Drawing.

30 or 45 degrees is the correct answer to “In oblique sketches, the most commonly used angles for receding lines are:”. This question is standard in competitive examination syllabi for Engineering Drawing.

Help the client understand the overall design concept is the correct answer to “Three dimensional models are often used in the design process to ________.”. This question is standard in competitive examination syllabi for Engineering Drawing.

All of the above is the correct answer to “The 3-D commands on the Modeling toolbar include __________.”. This question is standard in competitive examination syllabi for Engineering Drawing.

All of the above is the correct answer to “It is customary for the first sheet of a working drawing set to include __________.”. This question is standard in competitive examination syllabi for Engineering Drawing.

All of the above is the correct answer to “Some common blocks used by architectural drafters include __________.”. This question is standard in competitive examination syllabi for Engineering Drawing.

The distances between outside walls and interior walls is the correct answer to “The second line of dimensions out from the plan generally includes _________.”. This question is standard in competitive examination syllabi for Engineering Drawing.

All of the above is the correct answer to “Some of the standard Auto-CAD text styles used in architectural drawings includes _________.”. This question is standard in competitive examination syllabi for Engineering Drawing.

Inside is the correct answer to “A fillet is a rounded surface on the ________ corner of a part.”. This question is standard in competitive examination syllabi for Engineering Drawing.

Outside is the correct answer to “A round is a rounded surface on the ________ corner of a part.”. This question is standard in competitive examination syllabi for Engineering Drawing.

The Internet and e-mail is the correct answer to “Using this as a communication and design review tool can help shorten the process and eliminate productivity barriers:”. This question is standard in competitive examination syllabi for Engineering Drawing.

1 : 1 is the correct answer to “A full scale technical drawing will have a scale factor of ________.”. This question is standard in competitive examination syllabi for Engineering Drawing.

Insure that Ortho is on is the correct answer to “When using the direct entry method to create a horizontal line exactly three inches long the drafter should ________ first.”. This question is standard in competitive examination syllabi for Engineering Drawing.